Material Specifications

• Conductors: Bare copper, 23AWG, 1 x 0.57±0.005mm
• Insulation: HDPE, O.D. 1.09±0.03mm
• Foil Screen: n/a
• Braid: n/a
• Drain wire: n/a
• Jacket: LSZH 0.55mm thickness, O.D. 8.6±0.2mm
• Separator: PE

Installation Information

• Install temperature: 0℃ to 50℃ (32℉ to 122℉)
• Storage temperature: -40℃ to 60℃ (-40℉ to 140℉), under static conditions
• Operating temperature: -20℃ to 60℃ (-4℉ to 140℉), under static conditions
• Pulling tension: Max. 100N
• Bend radius: Min. 35mm (4x of cable O.D.)
• UL temperature rating: 75℃

Electrical Characteristics (ANSI / TIA-568.2-D)

• DC resistance: Max. 7.32Ω/100m for each conductor (UL444)
• DC resistance unbalance: Max. 4% within a pair at 20℃
• DC resistance unbalance pair-pair: n/a
• Dielectric strength: 1kV d.c./0.7kV a.c. for 1min. or 2.5kV d.c./1.7kV a.c. for 2s (IEC61156-5)
• Insulation resistance: 5000MΩ/km (IEC61156-5)
• Mutual capacitance: Max. 5.6nF/100m, 1kHz at 20℃
• Capacitance unbalance pair-ground: Max. 330pF/100m, 1kHz at 20℃
• Transfer impedance: n/a
• Coupling attenuation: n/a
• Phase delay: Max. 536ns/100m at 500MHz
• Delay skew: Max. 45ns/100m, from 1 to 500MHz at 20℃
• Nominal velocity propagation: 66% at 100MHz
• Characteristic Impedance: 100±5Ω at 100MHz
• PoE: 60Vd.c., 4PPoE 100W, IEEE802.3bt type 4
• UL voltage rating: 300V(UL444)